| Place of Origin: | China |
| Brand Name: | PORSHICHE |
| Certification: | ISO,MSDS,SGS |
| Model Number: | MK-119 Purple |
| Document: | Product Brochure PDF |
| Minimum Order Quantity: | 100Boxes |
|---|---|
| Price: | 2.73USD/L-5.56USD/L |
| Packaging Details: | Box/Carton;1L/2.5L/4L/5L/20L/200L |
| Delivery Time: | 10-15 Working Days |
| Payment Terms: | T/T |
| Supply Ability: | 1000Boxes/day |
| Voc Level: | Low | Fade Resistant: | Yes |
|---|---|---|---|
| Type: | Top Coat | Net Weight: | 0.95KG |
| Number Of Coats: | 2 | Drying Time: | 30 Minutes |
| Recoat Time: | 2 Hours | Sheen: | High Gloss |
| Protection: | UV-resistant | Chemical Resistance: | Yes |
| Uv Resistance: | Yes | Heat Resistance: | Yes |
| Highlight: | 1K PU Polyurethane Car Paint,Auto Refinish Car Paint,Acrylic Car Paint Coating |
||
Acrylic Automotive Repair Paint Spray Paint Polyurethane Automotive Care And Maintenance Products
Product Details
| Type | 1K Purple Basecoat color paint | |
| Substrates |
Well-sanded,completely dried and good existing finishes as: A. original paint B.old paint firm C.1K or 2K primer |
|
| Surface Cleaning |
Wash by warm soap, remove wax, silicon and other contaminations with degreaser, sanding with P800-P1000, wash with clean water then keep dry, again with degreaser. |
|
| Mixing Ratio | Basecoat | Thinner |
| <15°C | 1K Transparent Blue basecoat color paint | 602 Fast Thinner |
| 15-30°C | 1K Transparent Blue basecoat color paint | 602 Standard Thinner |
| >30°C | 1K Transparent Blue basecoat color paint | 602 Slow Thinner |
| Spray Viscosity | 14-16s to drop off, in 4# viscosity cup at 25°C | |
| Re-Treatment | After Spray, allow 10-20 minutes air-drying time,then spray clear coat at once. | |
| Spray Gun Set Up |
Gravity Feed: 1.2-1.5mm 3-5kg/cm² Gravity Feed: 1.4-1.6mm 3-5kg/cm² |
|
| Spray Technology |
Coats & Thickness: 2-3 coats, total 15-20um. Flash-Off Time: At 25°C, 5-10 minutes between two coats, it depends on temperature and paint film. |
|
Note:
1. The substrate must be cleaned and sanded before spray, wet sanding P800-1000 and then dry.
2. At ambient temperature higher than 30ºC, add appropriate Retarder Solvent into thinner to avoid blushing. For more details, please refer to technical data sheet of Retarder Solvent.
3. To avolid problems of mottling or poor adhesion, the metallic paint film should be 15-25um.
Mixing Ratio
| Temperature & Match | Temperature | Clear Coat | Hardener | Thinner |
| <15ºC | Economic/Standard/High Solid Type Clear Coat | Economic/Standard/High Solid Type Fast Dry Hardener | Fast Dry Thinner | |
| 15-25ºC | Economic/Standard/High Solid Type Clear Coat | Economic/Standard/High Solid Type Standard Hardener | Standard Thinner | |
| 25-35ºC | Economic/Standard/High Solid Type Clear Coat | Economic/Standard/High Solid Type Slow Dry Hardener | Slow Dry Thinner | |
| Mixing Ratio | 2 | 1 | 0.2-0.5 |
Contact Person: Wayne
Tel: +8613392100968
Overall Rating
Rating Snapshot
The following is the distribution of all ratingsAll Reviews