High Gloss Anti UV Car Paint Spray for Metal Plastic Fiberglass

Q6: Why does the surface have heavy orange peel?

A6: Improper dilution and unstable air pressure cause poor leveling. Adjust to standard viscosity and spray with stable air pressure and even gun movement.

Q7: Why does the paint peel and lose adhesion?

A7: Residual oil, wax and no primer sealing on putty or bare metal. Thoroughly degrease the surface and apply matching primer before spraying.

Q8: Why does the color fade or shift after clear coat spraying?

A8: Spraying clear coat before the base coat fully flashes off or using incompatible clear coat. Wait 10-15 minutes for full flash-off and use matched system clear coat & hardener.

Q9: Why does the spray gun clog easily?

A9: Pearl pigments sink and agglomerate after standing. Filter paint before use, re-stir during pause, and clean the gun timely.

Q10: Why does the paint fade quickly outdoors?

A10: Lack of UV-resistant clear coat protection. Must spray anti-UV 2K clear coat to extend color service life.